 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
3-Speed Ceiling Fan Wiring
I have an old 3-speed Craftmade ceiling fan (no light) that was working fine until the chain pulled out of the switch. I replaced the switch with one from Home Depot and wired it the same way.
L - Black (power) 1 - Brown (connected to reverse switch and capacitor) 2 - Gray (from capacitor) 3 - Purple (from capacitor) I get the following sequence (High, Low, Low, Off). I have switched the brown, gray, and purple wires in various combinations and get (Low, High, Low, Off) and (Low, Low, High, Off). I can't seem to get Medium from any combination. Any ideas? |
||||
Check out some similar questions!
This fan has worked fine without any problem for years? Remote switch play a part?
3 speed ceiling fan, only works on high speed, bought new switch,opened fan, old switch looks exactly the same, however, 2 wires not connected bare wires not taped just hanging there. These 2 wires (one brown, one red) are coming from another small rectangular gold brass box. The wires connected to...
Wire colors are: black, grey, green and brown
The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?
I have a 3 speed Hunter ceiling that I rarely turn off and all 3 speeds had been working. I recently turned it off and when I turned it back on, only the high speed is working. I assumed the switch was bad and replaced it. I still only have the High speed. Has anyone had this problem before? ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
