 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Free ceiling fan wiring schematics
I am replacing a 3 speed pull switch on a ceiling fan. I have five wires in the fan (black, gray, brown, light purple and dark purple). I have four wires on the switch. Can you provide me with directions on how to properly connect the switch?
|
||||
Check out some similar questions!
I have a hunter 52" ceiling fan that had three speeds. Now it goes from high with one pull of switch cord, then to medium on second pull, but goes back to high on third pull instead of low. Then off on fourth pull. I checked switch and capacitors, and test OK. Any help would be appreciated. ...
John deere 1800 utility vehicle wiring schematics
Hello all, I'm trying to install a ceiling fan in an old house (about 60+ years). I have a new ceiling fan with 4 wires, black, blue, white, and green. On the ceiling, there are only three wires, 2 copper wires (unfortunately no colors, just a dark covering over both), and a green wire, which has...
For the past two months I have been unable to use my Aloha Breeze 42" ceiling fan (model #: 93645 UPC #: 7-59590-99645-2), simply because the darned thing is coming free from the ceiling. Since I have only been renting this place for the past three months, I have no idea who originally had the fan...
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
