John deere mower will not engage

bendingleconte Posts: 112, Reputation: 9

Junior Member

Aug 23, 2010, 03:03 PM

John deere mower will not engage

My mower will start and run perfectly but will not engage in forward or reverse. There feels like there is hydraulic pressure when pushing the petals, but no going anywhere. I have removed the blade deck and the belts underneath are in good order and are tight.

Check out some similar questions!

John deere mower will not engage [ 12 Answers ]

I have a John Deere riding mower 100 series model #gx155ca026001. The blades will not engage when I pull the knob next to steering wheel. I checked belt and nothing is jammed. I was mowing some thick, tall grass prior to this. I took belt pulley covers off and there was a lot of grass jammed in...

John Deere mower L120 Trouble mower deck will not engage. [ 2 Answers ]

I have a John Deere L120 mower. The mower deck will not engage but the switch seems good. No power appears to be at the clutch on the mower deck.

John Deere LX172 PTO won't engage [ 15 Answers ]

I have a John Deere model LX172 riding mower. It runs well but I can't get the mower to engage. The main pulley under the motor will not turn. The engine will kill if I turn on the PTO switch while not in the seat so I'm assuming the switch and the safety part of it works. Any suggestions on what...

Why won't my john deere l130 blades engage [ 3 Answers ]

When pulling the PTO switch on the john deere l130 mower the blades won't engage

19 year old john deere 12 hp riding mower, starter does not engage [ 1 Answers ]

I have a 19 year old john dedere 12 hp 38" cut mower. When you turn the key on, the starter clicks and the drive teeth hit the botom of the flywheel ring gear. If you turn the flywheel just a fraction it will engage or if you keep clicking the starter it will eventually engage. What's wrong, I...

View more questions Search

Check out some similar questions!

Add your answer here.