 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Airconditioning
I have a fujitsu ducted unit which seems to be quite old, The problem is the fan for the indoor unit runs constently until you turn it off at the circuit breaker, turn the circuit breaker back on and the fan runs again. It is getting constent power from some where, I have replaced the pcb but that does not change anything. If I pull the supply to the pcb it will stop. Could it be a bad pcb replacement or the fan motor cap?I have pulled the cover off the unit to look at the fan motor and I can see that some windings are burnt, could this have anything to do with it any thoughts would be helpful.
|
||||
|
|
Check out some similar questions!
Why is the heat trying to kick on when the air is running?
I have a high efficiency gas furnace along with a heat pump/air conditioner. I want to change my old Honeywell Chronotherm 111, programmable thermostat with a new Honeywell Proo TH6220D model. The old one has seven wires the new calls for eight? Help!
My question is. That my airconditioning runs for about 14 minutes and cuts off for only about 8 minutes. Is that a good cycle?
What are the procedure to be followed for the commissioning of Pumps for Chilled water system for a building.what is the proper way of flushing the system and can we flush the system with main pump running or should use temporary pumps.at what stage the pumps should be aligned.
How do I calculate airconditioning requirements?
View more questions Search
| Question Tools | Search this Question |
|
