Ask Experts Questions for FREE Help !
Ask
    learninglee's Avatar
    learninglee Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 18, 2010, 04:06 PM
    Installing outlet and light from existing light switch in old home.
    I currently have a light switch that controls a fan/light combo in my bathroom. I would like to change the switch to a double switch that also controls a new light fixture. I would also like to run an outlet that is not controlled by the switch. The existing wiring is 12 gauge on a 20 amp breaker. The wires are round and only contain 1 wire per cable. I ripped all the walls down and only see what looks like a black wire and a white wire with black tape attached to each side of the switch. I found a white wire coming off the fan/light combo that I think I can tie into. Are either of these new connections possible?
    learninglee's Avatar
    learninglee Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Aug 18, 2010, 04:08 PM

    Also there are no ground wires anywhere!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I wire a new PIR external light to an existing light switch? [ 1 Answers ]

I want to install an external light and wire it to an existing light switch on the other side of the wall.

Adding light to existing threeway switch that controls an outlet how do I wire this [ 0 Answers ]

There is no lights in family room , added can lights . There are 2 switches that control an outlet. If I run light wire to switch how do I connect the wireing also changed 2 existing switches to switch/dimmers

Adding a new light with its own pull string to existing light and switch [ 8 Answers ]

Howdy. I have a 50 year old house where the bathroom light shares a common wall with the back of the master bedroom closet. I want to add a pull string light in the closet and tap the power off the bathroom light. The bathroom light is switched and the power comes first to the light and then...

How to wire an additional light to an existing 3-way light switch [ 5 Answers ]

I am in the process of finishing my basement, and the light at the top of the stairs is connected to a light switch at the top and bottom of the stairwell. I would like to add another light to this configuration at the bottom of the stairs. From what I can see, the power runs into the light...

Installing outlet from existing wall switch [ 12 Answers ]

I have a switch that controls an outside light. It is at the end of the run. I want to run an outlet inside the garage from that switch. I want the outlet to only have power when the switch is on. There are two black wires attached to the switch and the two white wires are connected with a wire nut...

View more questions Search