 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Air conditioning and heating
Working on a ruud 15 Ton condenser. The unit won't start. I have freon in it and also It is getting 24 volts from the transformer. The thermostat is calling for cool. Took the face off the thermostat checked to see what type of voltage was put when I touch the red wire which is hot and y1 which is the first compressor I get about 17 volts, when I do the same with y2 which is the second compressure I get about 18 volts. Can someone please let me know what is going on. Thanks for your help
|
||||
Check out some similar questions!
Heating and Air Conditioning
[ 1 Answers ]
My central electric heater is blowing air a few degrees above room temperature. The main breaker and breaker on the unit are on. Both elements ohm out so I assume they are not open. Do the relays that control individual elements frequently fail?
My ruud Heating & Air Conditioning is not blowing hot air
[ 1 Answers ]
My ruud Heating & Air Conditioning system is not blowing hot air, everything is working fine but not blowing hot air when I put it to heat
Heating and air conditioning
[ 1 Answers ]
What does it mean when th cooling on light flashes on your eat and air digital thermometer?
Heating and air conditioning
[ 2 Answers ]
How to test a 120 to 24 volt transformer can you use ohms if its out of the system?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
