 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York guardian gas furnace water in exhaust fan
I have an 80,000 Guardian Gas furnace. The rollout switch tripped the other day and it sounds like there is water in the Exhaust blower. First I wondered where the water might come from and if that tripped the rollout switch. Also where is the reset for the rollout switch ? I have a model GG9S080B12MP11A
|
||||
Check out some similar questions!
What causes a strong gas smell from the exhaust of a propane gas high efficientcy gas furnace
I have a tempstar furnace model # FBF075B12G1. The furnace is maybe 3 years old. The little motor which turns the exhaust gas blower feels a little hard to turn. There is some rust on top of it. It will sometimes fail to start, which keep the burners from kicking in. If I spin it by hand, it will...
Exhaust fan will not shut off after cycle unless you tapp on furnace
The photo in the URL below is of my furnace intake / exhause. It's a 90+percent efficiency gas forced air furnace, direct vent out the sidewall of the house. The pipes are 2.5" sched 40 pvc. The one on the left is the intake, one on the right is the exhaust. As you can see, I'm having the house...
I am trying to get the wiring for the blower I have. :confused: One side I have a black, white and red wire which goes to the plug. The other set of wires I have red, white, blue, yellow, and black. What goes with what? Please help me.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
