Ask Experts Questions for FREE Help !
Ask
    jasmarie1's Avatar
    jasmarie1 Posts: 57, Reputation: 0
    Junior Member
    		  
    #1

    Aug 13, 2010, 10:10 AM
    Can 7/8 stub kit be step be fitted to a 3/4 suction line
    Can 7/8 stub kit be step be fitted to a 3/4 suction line
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Aug 13, 2010, 12:27 PM

    Yes IF the size called for to operate on the unit is 3/4 OD. This way you are not restricting the line size.
    jasmarie1's Avatar
    jasmarie1 Posts: 57, Reputation: 0
    Junior Member
    		  
    #3

    Aug 28, 2010, 02:52 PM

    I have a 3.5 ton heat pump suction line 7/8" I have evapor coil suction line 3/4 will it work the coil is 3 ton both units is 13 seer
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What should I check if liquid line is cold and suction line is warm? [ 4 Answers ]

The unit was installed 3 years ago. It was never started until now. I have changed the filter dryer, vacumed, and I opened the txv inside the cased coil. I have sucked the refrigerant back, and vacumed 3-4 times, but the liquid line stays cold and the suction line stays warm. I do know the...

High suction line pressure [ 5 Answers ]

Charging a 2ton unit and the suction line pressure is at 90psi and the liquid line is at 175 psi.new line set,no kines,instill filter on both lines.new air handler and coil.

Suction Line Sweating [ 3 Answers ]

I have been dealing with this problem for a while now not knowing it was the suction line all along. It started some time back with a tiny wet spot in a bedroom ceiling. I figured a roof leak and had repairs done. Some time after the roof repair a new wet spot next to the first one then some time...

Check for suction line leaks [ 1 Answers ]

My irrigation pump keeps losing its prime. How do I check for leaks in the suction line?

View more questions Search