Ask Experts Questions for FREE Help !
Ask
    irish_in_pa's Avatar
    irish_in_pa Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2010, 05:29 PM
    High suction low head
    I have a 10 yr old unit that has a suction pressure of 110 abd a head pressure of 200 Its 90 degrees outside .Its a cap tube evap coil the house is not cooling at all suction line not cold at all It's a scroll compressor could it have bad valves?
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #2

    Jul 29, 2010, 06:42 PM

    All the coils clean? Condenser fan working properly?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Inground pool no suction in my skimmers low pressure [ 7 Answers ]

I have 2 skimmers in the deep end of my inground pool and I have no suction in both skimmers. Is it possibly clogged if so how do I unclog the skimmers just open the pool and had a lot of pine needles and debris on the bottom.:confused:

High suction line pressure [ 5 Answers ]

Charging a 2ton unit and the suction line pressure is at 90psi and the liquid line is at 175 psi.new line set,no kines,instill filter on both lines.new air handler and coil.

Low suction in toilets [ 1 Answers ]

Does anyone have any ideas for low suction repair in toilets before I call the plumber. We have two that are getting worse.

View more questions Search