 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
1999 4x4 chevy silverado jerks forward when excelerating...
It only jerks when I drive from fresno to madera and madera back to fresno for work. I think it is the driveline, but don't want to pay a lot for a diagnoistic test at a shop. When I accelerate it jerks one time and then after it stops... from work to home and home to work. It does it every time I'm at a complete stop when I first drive her after a night and the car has been warmed... what gives?
|
||||
|
||||
|
When was the last time that your dropped and cleaned the transmission pan, changed the filter, and refilled with ATF? This link may help: https://www.askmehelpdesk.com/cars-t...tml#post552241 |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We have a 42 in riding mower. After we manually engage the blades, slide the lever up for the belts to turn, we then push the speed lever forward. We normally have to push this lever almost all the way to the stop before it moves and when it does move, it is a big jerk. Last summer I had the gas...
Right and left turns are fine at speed, but when slow or no speed, right turns are muscle exercises while left turns are still fine. I think it is the steering gear box. Anyone agree or know differently?
my service 4x4 comes on... the 4x4 still works I think but it takes a while to get it to switch out of 2wheel to 4 wheel... the lady I bought the truck from said that it needs a starter solinoid but I'm thinking maybe it just needs a new switch... any thoughts?? Thanks I appreciate any feedback
2000 Silverado 1500 keeps showing Service 4WD light... we replaced the switch in the dash, the encoder motor on the transfer case, the actuator, the module behind the switch, checked the ground wires, traced all of the wiring... nothing's worked! :mad: Occasionally, when you switch the key on...
View more questions Search
|
