Ask Experts Questions for FREE Help !
Ask
    bbsetser's Avatar
    bbsetser Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 18, 2010, 06:48 AM
    Diswasher don't get water to top rack
    Dishwasher is not getting enough pressure on the top rack. We have cleaned the screens. It is getting enough water. The bottom is washing but not the top rack.
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Jul 18, 2010, 02:51 PM

    You need to take a toothpick and poke all the holes in the sprayer arm. This should solve the problem. If you have 2 sprayer arms do both of the arms paying attention to getting all the holes. Should solve your problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Plate stuck in top rack of dishwasher [ 3 Answers ]

A small plate was put in the middle back of the top rack of my dishwasher. When the rack was pushed in the plate became wedged behind the mechanism in the upper inside of the machine, and now the rack can't be pulled out. I've tried reaching from below the plate and haven't been able to move it. ...

Dishwasher top rack not cleaning [ 1 Answers ]

We have a whirlpool dish washer(GU1500XTLQ0) that is around 4 years old. The top shelf seems to not be cleaning. I ran it with the door partly open and can see it is getting water up the arm. I tooy out the arm and it is not blocked and spinns freely. The very top spinner gets no water out of it....

No water on top rack of Kenmore dishwasher [ 2 Answers ]

I have a 3 yr old Kenmore dishwasher that is not spraying any water on the top rack. I have already disassembled the upper wash and rinse parts and verified they were not plugged up. Is there anything else I can check before calling in the repairman?

View more questions Search