Ask Experts Questions for FREE Help !
Ask
    Robbie_36's Avatar
    Robbie_36 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2010, 03:26 PM
    Kenmore dryer model# 11066522501 does not heat
    I have changed the heating element, the thermal fuse, and the therma stat but it still does not heat, what else could cause it to not heat?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 15, 2010, 04:06 PM

    With Dryer in Running, I would measure across each sensor, if they are intact you should read zero volts, if you read voltage , it is open, and needs to be replaced.
    If the Element has voltage and is not heating, it is open. An Amprope is handy but not necessary.
    applianceman's Avatar
    applianceman Posts: 30, Reputation: 2
    Junior Member
    		  
    #3

    Jul 15, 2010, 09:07 PM
    You need to make sure you are getting 240 volts to the dryer. Check your breaker. Turn it off then on. If you have a volt meter you can check for power where the cord connects to the dryer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Model 417.94712400 stackable washer/dryer; dryer doesn't heat up. [ 4 Answers ]

Dryer drum rotates, and it responds to the "cycles" dial, but the heating element doesn't heat up. Is there a reset button somewhere, or do I need to replace the heating element, OR? Thank you.

Dryer that does not heat-kenmore model #86874100 [ 1 Answers ]

How can I trouble shoot my kenmore,model#86874100,dryer that will run but not heat

Kenmore dryer no heat model 110.66712 [ 0 Answers ]

The dryer runs, but does not heat up. It also never shuts off on timed drying. I found what looks like a burned out resistor, a ceramic bar covered in hard plastic, spliced in the orange wire between the timer and the heater, per schematic. The plastic cover is split open and looks melted. Would...

Kenmore Dryer Model # 110.96591220 Won't Heat [ 5 Answers ]

Dryer won't heat and I have continuity on all the reachable parts. Not getting juice to the coil during operation. I should have 0.00 OHMS for normal operation, tested when cool on all the parts, right? Thanks for your help.:eek:

View more questions Search