Ask Experts Questions for FREE Help !
Ask
    joshua27's Avatar
    joshua27 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2010, 09:11 AM
    Dryer that does not heat-kenmore model #86874100
    How can I trouble shoot my kenmore,model#86874100,dryer that will run but not heat
    Theswagg01's Avatar
    Theswagg01 Posts: 23, Reputation: 1
    New Member
    		  
    #2

    Jun 18, 2010, 11:40 AM

    Most dryers get loaded up with lint and will pop the thermal fuse first which is mounted in there near the heat source and is wired in.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Model 417.94712400 stackable washer/dryer; dryer doesn't heat up. [ 4 Answers ]

Dryer drum rotates, and it responds to the "cycles" dial, but the heating element doesn't heat up. Is there a reset button somewhere, or do I need to replace the heating element, OR? Thank you.

Kenmore dryer no heat model 110.66712 [ 0 Answers ]

The dryer runs, but does not heat up. It also never shuts off on timed drying. I found what looks like a burned out resistor, a ceramic bar covered in hard plastic, spliced in the orange wire between the timer and the heater, per schematic. The plastic cover is split open and looks melted. Would...

Kenmore gas dryer model #md4207586 - no heat [ 2 Answers ]

Drum turns. Ignitor replaced. No flame. Is there a heat element or coil in a gas dryer? Should I be looking for a flame near the ignitor? Thanks for any suggestions.

Kenmore Dryer Model # 110.96591220 Won't Heat [ 5 Answers ]

Dryer won't heat and I have continuity on all the reachable parts. Not getting juice to the coil during operation. I should have 0.00 OHMS for normal operation, tested when cool on all the parts, right? Thanks for your help.:eek:

View more questions Search