 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
How do I locate my furnace relay switch?
I turn the forced warm air rheem gas fired furnace on at the thermostadt from off to hest and the furnace goes through its cycle and starts. It runs for 5-10 minutes and provides heat and then shuts off and does not restart itself automatically/ I can turn it to off and to het on the thermostdat...
What's wrong when my furnace starts blowing hot air then stops and shoots out cold air... then when I check the thermostat the temp went down by itself...
My intertherm #e2eb-01sha electric furnace mostly just blows cold air. Sometimes however the heat works just fine. Also, anytime the blower is not running the furnace is hot so we have to turn off the safety disconnect. We have tried replacing the thermostat to no avail. Help please Michael
I have an amana furnace about 20 years old. Model #ghi115a35. When I put the thermostate at 70 or 75, does not matter, the inducer motor comes on, the glow light is on, the gas valve will open, but will not ignite the burners. Then the gas will close, I try again, about two times, then the gas...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
