Ask Experts Questions for FREE Help !
Ask
    btrfla's Avatar
    btrfla Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 9, 2010, 06:06 PM
    Install honeywell th5220d1003 to goodman aruf33016aa a/c need help wiring
    Tried to install a hunter programmable but since it look too much work tried to re-hook up the old honeywell th5220d1003 to aruf33016aa a/c but I can to remember what wire goes where?

Check out some similar questions!

Trying to install a Honeywell rth3100c thermostat but the wiring diagram does not mat [ 0 Answers ]

installing a Honeywell rth3100c thermostat however the wiring diagram does not match what is currently in place on the old mercury switch model my current connections w2-white y-yellow-g-green e-black r-red b-blue x-orange and terminal L and O are empty

Wiring honeywell th3210d thermostat to goodman mbr1200aa-1 modular blower [ 7 Answers ]

Need a wiring diagram to connect a honeywell th3210d thermostat to goodman mbr1200aa-1 modular blower with 20kw heater coil

How do I install a new Honeywell RTH230B from Honeywell T8195B [ 1 Answers ]

Good evening. Our old thermostat was model T8195B which came with wires C,Y,W,R & G. has no rererence as to where they hook up. The new one RTH230B doesn't say where these wires go. I've removed the Rc/Rh jumper according the instruction manual. Nothing went on at all. What can I go Thank...

Wiring for Honeywell TH5220D1003, set on cool, but blows heat. [ 2 Answers ]

I have a 2 1/2 ton Goodman self contained heat pump with a heat strip which was set up with a Janitrol HPT 18-60 thermostat. I replaced that with a Honeywell TH5220D1003 thermostat. The Janitrol was wired: Y= yellow G= green ...

Install Honeywell RTH230B, Removing Honeywell Q674L [ 2 Answers ]

I am removing a old (1987) Honeywell Mercury THermostat Q472L Base that has W, R, Y, G, B, O. The RTH230B has Rc (which I assume to be B), Rh (which I assume to be R), Y (to Y), W(to W), G (to G). I have no idea what to do with the O (which I read could be the Changeover. Do I just tape it up...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.