Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connecting hdtv, stb, analogue vcr/dvd combo and AVR
[ 2 Answers ]
Hi, I have the following equipment which I purchased in 2006: Sharp HDTV Panasonic VCR/DVD recorder combo (analogue) Panasonic AV Receiver (analogue) DGTEC HD set top box I have connected all the above, but I have to keep the STB swithced on so that I can watch the TV. Also I don't think...
Using analogue components (not IC's) to make an led flash.
[ 2 Answers ]
How do I make an LED flash on and off repeatedly using only analogue components? I can do it with a 555 times IC but I was wondering if it could be done using only analogue components. Thanks, Scurley. P.S. Does anyone know where I can find out the internal component layuot for logic IC and the...
How to find % error caused by a analogue meter
[ 1 Answers ]
Hi,Was wondering if anyone could help me with this question? The Voltage (Vs) is 2.5volts A.C and has an output impedance of 1 ohm and forms a potential divider with a lamp,which has a resistance of 12.5 ohms. 1)What is the % error caused by connecting an analogue meter across the lamp?...
Changing analogue to digital -- Handycam videos
[ 1 Answers ]
I have an older Sony Handycam Video Hi8 model CCD TRV228E PAL and would like to know the easiest way of converting my video to digital. I thought I should buy a digital handycam, put my tapes in and record onto my computer but don't really know if this is best or where to start. Basically I...
Analogue / digital
[ 5 Answers ]
Explain digital and analogue control signals and their applications View more questions Search
|