Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter thermostat not reaching set temperature
[ 2 Answers ]
My hunter thermostat model 47110A is set to 20 degrees celsius but the furnace will not stay on long enough for the temperature to rise to the set degree. It is currently holding at 16 degrees instead. The batteries are brand new but still the temperature will not rise. This is my first home so...
Replacing an old Incesa Standard toilet with American Standard
[ 0 Answers ]
Can the old Mexican version Incesa Standard wall mounted toilet be replaced with the new elongated version of the wall mounted American Standard toilet? Making sure both fits are standard connections... sizes, etc. I've heard 4" center and 4 1/2" center from floor. What do I need to be aware of...
American standard hunter 44860
[ 0 Answers ]
I am changing my thermostat... American Standard asystat655a to a new hunter 44860 and need the wiring diagram for both as the letters and colors are not the same, any help you can give will be appreciated.
American standard furnace thermostat wiring
[ 1 Answers ]
Ijust purchased a new furnace, an American standard with Intell Ignition control (50A65-476). I am only using it as a furnace, no heat pump or air. The old furnace used a two wire thermostat. The new control has twin-Y-W-R-G-C. Which do I need and which if any need to be jumped to use the furnace.
Installing Hunter from American Standard
[ 1 Answers ]
I am having trouble hooking up a Hunter 44860 thermostat. My old thermostat was an American Standard Thermostat ASYSTAT655A. Any suggestions would be most helpful, Thanks so much! Andy View more questions Search
|