Ask Experts Questions for FREE Help !
Ask
    sjnowak's Avatar
    sjnowak Posts: 80, Reputation: 1
    Junior Member
    		  
    #1

    Jul 3, 2010, 07:48 AM
    Shallow well pump problems
    Having some trouble with the pump at the lake cabin, seems to run much longer than it should or used to - it builds up pressure to about 46 - 48 accordint to the gauge ( probably not exactly accurate - who knows ) but keeps running for a long time but if you tap on control switch box it will quit, can it be because the switch is sticking or maybe it never really reaches cut out pressure, if so why, what can I try ?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Jul 3, 2010, 10:23 AM

    Sure sounds like the switch is sticking. Turn off the power, then use an emory board (or small grit sandpaper) and give the points a few strokes each. If it continues to stick, then replace it... 25 bucks or so will buy a new switch.

    You might also want to check the little pipe leading to the switch. They are notorious for clogging up with crud and making the switch slow to respond.

    Also, spend 5 bucks more and put on a new pressure gauge. A functioning gauge is not needed to make the system work right, but it is really important when trying to diagnose problems.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Shallow well pump and tank problems/tank will not fill [ 18 Answers ]

Hi, I need help, I can't get water to pump into tank. I bought a new pump and tank but it still won't work. I have a 19 gallon upright tank with air value on top and one hook-up at the bottom of the tank. And a 1 hp, 800 watt, 60hz, 10 amp max, 3/4, 120volt, 23 to 50psi, 23gpm max water pump. I've...

Do I need a Shallow well pump ? [ 9 Answers ]

:cool: Hi, I just bought a cabin that has a spring on the property up above the house at an entry elevation that is maybe 7-10' above the roof line. My spring flows into a shallow holding well then flows through 1" sprinkler line (Black plastic hose) The water must flow constantly because...

Shallow well pump priming [ 1 Answers ]

I have tried numerous times to prime my well pump. I shut off all lines. Turn the power off the well pump, and then fill the line appropriately. I then turn on the power and everything sound great for a moment and then it is like there is no water in the well. In fact, there is over 7 feet. Can...

Shallow well pump [ 1 Answers ]

I can't seem to get my wellsaver tank to fill to hold pressur .I have a shallow well pump.

Shallow well pump [ 1 Answers ]

It will build pressure but as soon as it shuts off at 38lbs. It drops to 18lbs. In about 1min

View more questions Search