Ask Experts Questions for FREE Help !
Ask
    sanadonna's Avatar
    sanadonna Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 27, 2010, 03:45 PM
    how to frame a sliding door
    Greetings, we are building a patio15'x30' wich will have 3 sliding doors in the design,the roof will be of a fiberglass material material that looks like old fashioned zinc sheets.

    What type of framing is required for a patio this size... also I was thinking of building the deck first and ahen frame the space on top of it.

    sanadonna
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #2

    Jun 29, 2010, 07:10 AM

    Could u give more info.

    What u mean by "type of framing"?

    Are u building a patio on ground?

    Will it have deck over it?

    These are same things need to know to help.

    Chuck
    sanadonna's Avatar
    sanadonna Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 2, 2010, 06:08 PM
    Hi Chuck,
    thank you for the corection that should be do I use 2x6 or 2x4 to frame my sunroom?
    I am trying to build a sunroom 15'x 30' about 12"off the ground.
    it will have roof.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #4

    Jul 2, 2010, 11:45 PM
    Hi sanadonna

    For the floor beams can u go larger then 2x6? If not, have to put a double 2x6 mid way from wall of house to end of deck. Supporting this double u will need 4 piers that go below frost line. U will also need 4 piers at end of deck.

    The box beam should be double 2by. After u have poured the piers and set center double 2x6, cover ground with poly and crushed stone. Install floor beams using teco hangers.

    U can frame walls with either 2x4 or 2x6, depending on the look u want. Would use 2x10 for header over doors

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My sliding glass door with aluminum frame is leaking from the top [ 1 Answers ]

My 25 year old 3 level townhouse's slider in the basement level is leaking from the top of the frame on the fixed glass side. There is no evidence of moisture on the interior walls on the two levels above the door, nor on the wall above it. The roof looks fine on the outside. There is a deck...

Warped sliding glass door frame causes door to stick. [ 5 Answers ]

The center of our 8 foot sliding glass door bends out about 3/8 inch more than the two ends causing the door to wedge against trim that keeps the door from falling out when the door is closed making it difficult to open the door. How do I get the center of the door frame into place so the door...

Ceramic tile finish edge next to sliding door metal frame [ 1 Answers ]

How do you finish the edge of ceramic tile next to edge of metal frame sliding door? Do you butt the edge of tile to edge strip or leave 1/4 inch gap for grout? William rossbach


View more questions Search