Ask Experts Questions for FREE Help !
Ask
    devco's Avatar
    devco Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 30, 2010, 06:58 AM
    Wiring multiple lights for shop
    My question on wiring multiple lights... I have recently built a shop and ran out of money to electrify it. I have purchased 10 4 foot lights that use T8 bulbs and have a couple hooked to an extension cord for lighting that allows current use. I would like to wire one switch to all 10 lights. Three across one truss, three across the next truss (10') away and two on the next truss. With two over a work bench area. Later I will run a 100 amp breaker system for my house to the shop. Thanks in advance for any suggestions.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #2

    Jun 30, 2010, 05:24 PM
    Not sure what the question is. Depending on the total load of the lights you probably can put them on one switch. You will need to get the operating wattage information from one of the fixtures before we can answer your question.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring for multiple lights and switches [ 1 Answers ]

I am adding a new circuit of lights, and I want to know if this way will be OK. -The supply from the panel enters the first fixture. The black supply is connected to 1)the white wire of the switch leg 2) the black of the leg that runs power to the next set of lights. The supply white is connected...

Wiring multiple lights with a 3 way switch [ 6 Answers ]

How do you wire multiple lights using a 3 way switch? I wired multiple lights using a 3 way switch and when I turn on the switch, the lights are dim. What did I do wrong?

Wiring Multiple Lights on one circuit [ 4 Answers ]

I want to run 6 can lights, 2 other lights and one light in the bathroom. Can I run all of these on 1 15 amp circuit? And if so how would I go about connecting them all? Any help would be greatly appreciated.

Wiring Diagram multiple lights [ 1 Answers ]

I was giving this "homework" from my co-worker and I've gotten an answer and he says that it was wrong.. I'm not sure how to put pictures His Question: There are 6 lights Light 1 is all the time except when light 4 is on Light 4 is on only when lights 1, 5, 6 are off Light 5 is off only...

Wiring one switch for multiple lights [ 2 Answers ]

I understand the wiring for a single switch for a single light but what do I do with multiple lights on the one switch without making the whole circuit run off that switch. There are other outlets that need constant power on the same line as the two lights.


View more questions Search