Ask Experts Questions for FREE Help !
Ask
    schatten69's Avatar
    schatten69 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 1, 2008, 08:18 PM
    Wiring Diagram multiple lights
    I was giving this "homework" from my co-worker and I've gotten an answer and he says that it was wrong.. I'm not sure how to put pictures

    His Question:
    There are 6 lights

    Light 1 is all the time except when light 4 is on
    Light 4 is on only when lights 1, 5, 6 are off
    Light 5 is off only when light 2 is on
    Light 6 is on only when light 3 is on
    Light 2 comes on with a switch which also shuts off Light 3


    ---------SWITCH-------Light 2 ---- light 4------------
    | | |
    | | |
    | ----Light 1 ---- light3 --- light5 -- light6------
    | |
    -----------------------------------------------------------

    This is what I came up with.. as I said sorry but I can't figure out a way to
    Put pictures on here.. best I could come up with
    Tev's Avatar
    Tev Posts: 232, Reputation: 20
    Full Member
    		  
    #2

    Dec 2, 2008, 02:18 PM

    Are you allowed the use of other devices or just the one switch?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to run multiple lights on one switch? [ 20 Answers ]

Can anyone tell me how to bring power into a light, run to 3 other lights and then down to a switch? What I have done allows me to turn the lights on, but they are very dim so something is not right. Thanks,

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

Multiple Lights from one switch [ 1 Answers ]

Hi there, was wondering what is the best way to wire multiple lights from one switch? When I say multiple I mean about 6 can lights in a kitchen. I will be running a new circuit from the box. I have always wired 2 or 3 lights from a single junction box which contains the power, the switch and...

Multiple lights and ceiling fans [ 3 Answers ]

My church just bought an old building to move to. In the large room we removed all the lights. We wanted to install 6 light fixtures and 4 ceiling fans with lights. We wanted to add a dimmer switch to dim all the lights but found out all of the wiring is controlled by one switch. If we install a...

Wiring one switch for multiple lights [ 2 Answers ]

I understand the wiring for a single switch for a single light but what do I do with multiple lights on the one switch without making the whole circuit run off that switch. There are other outlets that need constant power on the same line as the two lights.

View more questions Search