Ask Experts Questions for FREE Help !
Ask
    scanzdad's Avatar
    scanzdad Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 26, 2010, 06:08 PM
    16hp starter motor
    I have a 16hp b&s.the motor turns over once and stops.I have a new batterie and the cables are new .if I keep trying to start it the starter gets hot.I tried tapping it with a screwdriver to see if it loosens but it does not help.if the starter is bad how do I take it apart and fix it.or is there another problem?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 26, 2010, 06:53 PM

    Take plug out. Bet motor will spin correctly and not stop.

    Adjust valves.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing starter moter on 16HP V-Twin vanguard engine [ 11 Answers ]

I have a Briggs and Stratton 16HP V-Twin OHV Vanguard Engine I am repairing. I am trying to replace the starter motor. . The bendix of the starter motor is plastic and has broken teeth and therefore does not engage with the main flywheel anymore. In order to accomplish this task I have stripped...

Starter Motor [ 1 Answers ]

Hello, I've recently installed a new starter motor in my Audi A3. It came with a brass cylindrical tube that fits over the end of the starter. When I took out the old one I left the brass tube in the housing anD am using it with the new starter. The brass cylindrical tube is the same with both...

Briggs & Stratton 16HP Vanguard Motor [ 4 Answers ]

Hi, I have a B & S 16Hp Vanguard motor that runs hydraulic tools. The motor was smoking and running rough so I replaced the oil, gas, and air filter. I started it up with out the oil filter on and the motor runs perfect. I reinstall the air filter and the motor begins to choke out and run...

B&S starter gear, 16hp cast iron single [ 3 Answers ]

Have a 16hp B&S single cyl cast iron motor that continues destroying the starter gear. Motor has aluminum ring gear and plastic/fiber starter gear. After several starts (3 to 10) it destroys the teeth on the starter gear. I'v checked with my dealer and the parts are correct #s. The ring gear was...

Dc starter motor [ 1 Answers ]

I need step to step repair of car starter motor and diagram,thanks

View more questions Search