Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
6 year old Payne Heat Pump compressor failed
[ 1 Answers ]
The compressor on my 6 year old Payne Heat pump failed. The HVAC guy offered 3 solutions. 1. replace compressor - cost $1100 -$1300 2. replace whole outside unit - cost $2500 3. replace everything with new, more efficient unit cost: $7k+ It is Payne model PH10 2.5 ton R22. HVAC guy...
Payne Heating and Cooling
[ 1 Answers ]
I am trying to get some info on a Payne Heating and Cooling system. Our Home is about 1800 sq. ft. and what we have is a PH13 split system heat pump with R-410A. The fan coil unit is a PF4M. Is this a pretty good unit and how does it compare to a Trane unit of the same size?
Payne A/C motor not running/cooling
[ 11 Answers ]
I have a Payne unit that was installed about 4 and a half to 5 years ago. It/s a Model # PH10JA048-B, with a 1/4 hp GE motor (#5KCP39FGS0715). The outside motor that operates the a/c unit is not running. I'm not sure if the unit is still under warranty, and don't want an excessive service bill....
Payne forced air with cooling unit
[ 4 Answers ]
It's a Payne Forced Air Furnace with Cooling Unit the product no. 585hjw024040abae, model no. 585hj054040, like I was asking in my previous question. It doesn't have a circuit board it has a contacter,step down transformer,relay,capasitor,run capasitor,spark ignition module,gas valve. I changed the...
Cooling: blower runs but compressor does not start
[ 3 Answers ]
I have a heat pump outside and a blower in the attic. Both made by YORK. My system stopped cooling a week ago. The blower keeps running but the heat pump does not start. I checked the circuit breaker in the basement and the power disconnect next to the outdoor unit. Both are good. I studied... View more questions Search
|