Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replace toilet shut-off valve handle
[ 2 Answers ]
The handle broke on the shut-off valve that services my dishwasher. The valve is soldered in-line, and in good condition - the pot metal handle cracked so that only the center cog remains. It is an odd configuration because the shaft has approx. 16-18 points on it. No replacement handle in the...
Handle broke off on shut-off valve under sink
[ 5 Answers ]
Tried to turn off valve and handle (made of plastic) broke off. The thing that the handle turns is surrounded by a large nut, which I guess I could take off. I'm wondering if one can replace the handle, or whether it will be necessary to replace the whole valve. Looks like the valve goes on to...
Toilet handle leak
[ 1 Answers ]
My toilet leaks at handle hole, how do I lower water level?
Where's toilet shut off valve?
[ 1 Answers ]
I cannot find a valve to shut off my constantly running toilet, till the plumber can arrive. Every other place I've lived has had a separate shutoff valve for each toilet, sink, etc. I've looked in, under & around the back of the tank, but there is no valve on the pipe in the bathroom. I've also...
Water dripping from angle shut-off valve handle
[ 3 Answers ]
I have limited plumbing knowledge so pardon the question if foolish. I have a leak under a bathroom sink that has double shut-off valves (h&c). On the hot side the leak seems to be a drip from the shut-off valve handle. The shut-off valves attach to grey plastic supply lines and are secured by what... View more questions Search
|