Ask Experts Questions for FREE Help !
Ask
    ceravino's Avatar
    ceravino Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 18, 2010, 10:38 AM
    I have a 2003 craftsmen 17 hp kohler tractor it stalls after 5 minutes of cutting the
    I have a 2003 raftsmen lawn tractor with a 17hp kohler motor after 5 minutes of lawn cutting it stalls and is hard starting and keeps on stalling
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Jun 18, 2010, 07:27 PM

    You might check your gas cap ,and make sure it is venting.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kohler 301a tractor engine smokes, runs rough, stalls and 'binds' [ 0 Answers ]

My elderly neighbor has an old Cub Cadet 129 tractor with a Kohler 301a 12-hp engine that I use to cut her grass. It has worked pretty well for years until today. I cut for about 30 minutes and the engine started to smoke (light-gray/white smoke). I can't tell exactly where it's coming from, but...

Lawn Tractor stalls after 5 minutes [ 2 Answers ]

L also have a Craftsman lawn tractor (917.274400). It starts, runs for about 5 minutes and then stalls. I let it cool off for about 5-6 minutes. It starts and runs for about one minute. I changed the gasoline, the oil and the fuel filter with the same results. What next?

93 suburban stalls after 10-15 minutes idling. [ 5 Answers ]

93 suburban stalls after idling for 10 or 15 minutes. It acts just like the fuel pump stops, but I have fuel at the throttle body and the fuel pump runs and cycles like it is supposed to. I replaced the fuel pump and the fuel pump relay just in case, but the intermittent problem of it just...

WeedEater Rider stalls after 3-4 minutes [ 1 Answers ]

I have a weedeater rider with a tech engine. I spent $165.00 to get it tuned up back in May 2006. I used it about 15 times this year. Roughly 40 hours on it. The reason why I spent $165 to get it fixed was it kept on stalling after I ran it for 3 to 4 minutes. Well it's happening again. The...

View more questions Search