Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
After I flush my toilet the water level in the toilet bowl itself is always very low.
[ 2 Answers ]
After I flush my toilet the water level in the toilet bowl itself is always very low. How can I fix this issue. Thanks!
When you flush toilet, all water doesn't go out
[ 5 Answers ]
We had to install a new toilet kit( flapper, flush mechanism, float, etc... ). I took the old one out and installed new one. I got no leaks so thought I was good to go. However, when we flush it fills with water and barely pushes water out. My flapper has an adjustment of min - max on it and...
Toilet fills up with water when I flush it but the water doesn't drain away again
[ 1 Answers ]
Please please please help me... When I flush the toilet it fills up with water but then the water doesn't drain away again... wht do I do to fix it?
Using 2 sources of water causes toilet to flush on own
[ 6 Answers ]
When we use 2 sources of water at the same time (say a shower and a toilet) this will cause the downstairs toilet to flush on its own.(we can use the sink and flush a toilet downstairs and the upstairs toilet will flush, we can use different combinations, although the same combindation causes the...
My toilet won't flush unless we turn the water off and on
[ 1 Answers ]
About five day ago my toilet started not to flush. We have figured out that if we turn the water off and back on after a minute that it will flush one time. We have to repeat that step every time we flush. We have a fluidmaster 400 series. What is wrong and how can I fix it? Thanks:confused: View more questions Search
|