 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool washer spins small loads
Hi! My washer will spin dry medium sized loads but not large loads unless I split them. I checked hoses for blockages and didn't find any. Washer seems to pump out fine. It doesn't seem to go into high speed spin, though, even with the smaller load.
Ideas? Thanks! |
||||
Check out some similar questions!
Washer drains OK but if it is a light ld it seems to spin OK,but if you have a heavy ld in the washer when it hits the spin cycle it is really slow or may not spin at all
My whirlpool washer spins slow
Howdy everyone. What I have here is a 2 year old Whirlpool Washing Machine. 3 days ago, it decided it didn't want to spin. I smelled rubber burning so I opened up the machine thinking belt failure. What I found was the direct drive coupler had failed. After replacing the coupler, I started a small...
My Whirlpool washer is old but I haven't had trouble from it until now. Model# A5550XPW7... serial#CX2964691. It leaves water in the tub at the end of the wash and rinse cycle. More water with each cycle. Yesterday I took off the hoses and checked for blockage and nothing. It drained the standing...
After the wash cycle the washer makes a sound but doesn't spin, it does drain the water out though. If you lift the lid and shut it then the spinning starts... anyone have any ideas before I call stupid whirlpool. Thanks Tiffany
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
