Ask Experts Questions for FREE Help !
Ask
    xspjfx's Avatar
    xspjfx Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 12, 2010, 04:26 AM
    My cistern doesn't seem to fill properly
    My cistern doesn't seem to be filling up properly... when I try to flush, there doesn't seem to be enough water... I have to hold the float down for approx 15 - 20 seconds to enable more water to fill the cistern... at this point the toilet will flush.. any ideas??
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #2

    Jun 12, 2010, 06:31 AM

    The water in tank should be 1/2 inch below overflow tube. This should give u enough water to have a good flush.

    To adjust float bend rod to float so that float is raised.See image on right.

    For float on left, adjust water level link to raise float.

    Chuck
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gravity rainwater tank won't fill cistern [ 3 Answers ]

I have a Fluidmaster (400UK) ballcock in my cistern. I want to use a rainwater tank to fill it just using gravity. The tank's 3 or 4 feet higher but the water won't run in. I've read in this question (https://www.askmehelpdesk.com/plumbing/toilet-cistern-slow-fill-350059.html) details on how to...

Toilet Cistern Slow to Fill [ 4 Answers ]

Hi I have a close coupled push button toilet cistern that is now incredible slow to fill, had a look inside just drippling in water takes hours to fill. Any help would be appricated.

Water slow to fill cistern [ 2 Answers ]

Push button type toilet takes the cistern up to 2+ hours to fill. Could this be an air lock? Can someone please suggest a solution. Alternatively if this is not the problem, could someone please offer cause and solution? As you may gather... I haven't a clue!!

WC cistern will not fill [ 1 Answers ]

2 years ago we had a new toilet fitted, within those years we've had 1 new cistern installed because the it would not fill and it's happened again. It's a low fitted. As anyone any idea what causes this and how to "fix it" Thanks


View more questions Search