Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   My cistern doesn't seem to fill properly (https://www.askmehelpdesk.com/showthread.php?t=478835)

  • Jun 12, 2010, 04:26 AM
    xspjfx
    My cistern doesn't seem to fill properly
    My cistern doesn't seem to be filling up properly... when I try to flush, there doesn't seem to be enough water... I have to hold the float down for approx 15 - 20 seconds to enable more water to fill the cistern... at this point the toilet will flush.. any ideas??
  • Jun 12, 2010, 06:31 AM
    creahands
    1 Attachment(s)

    The water in tank should be 1/2 inch below overflow tube. This should give u enough water to have a good flush.

    To adjust float bend rod to float so that float is raised.See image on right.

    For float on left, adjust water level link to raise float.

    Chuck

  • All times are GMT -7. The time now is 12:37 AM.