Ask Experts Questions for FREE Help !
Ask
    gato1time's Avatar
    gato1time Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 4, 2010, 05:22 PM
    I have a bryant plus 80v the code 24 is blinking how do I fix this
    My a/c monitor turned off I went into my garage and notice the led light had to quick blinks and 4 long ones ( code 24) How do I fix this and get my monitor back on?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jun 4, 2010, 06:00 PM
    1st turn off the power to the furnace at breaker box,, wait a couple minutes and turn back on,, try the system again, do you still get the code 24? If you do does the inside of the bottom door/cover give you any explanation?
    gato1time's Avatar
    gato1time Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 4, 2010, 06:32 PM

    I found out I had a blown out fuse. I replaced the fuse and everything turned back on after 30 seconds the fuse blew out again.. What is causing this?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

TRANE XE80. Problem Code: 1 long and 4 short blinking lights [ 0 Answers ]

One morning about a month ago, my furnace wouldn't start. The repairman came and replaced the "inducer draft motor and blower assembly". Not cheap! At that time I didn't know enough to record the blinking light code, but looking back I think it was blinking 3 times. Now, a month later, at 6 am...

What does a white rodgers code continuous blinking meaning [ 5 Answers ]

What is bad if the code light blinks continuous on white rodgers 50a55-143 board

Blinking L6 bryant thermostat display [ 1 Answers ]

Why does my bryant furmace thermostat display a blinking L6 and what does this mean? Thank you

No flame, Yellow LED blinking every second, blower working, How do I fix it? [ 1 Answers ]

I have a Carrier Furance that is one year old. Everything appears to be working fine but no flame when I turn uo the T-stat. LEd is blinking every second. Any ideas? Chris

View more questions Search