Ask Experts Questions for FREE Help !
Ask
    spinnerrus's Avatar
    spinnerrus Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jun 1, 2010, 06:36 AM
    How can I go aroung the ignition to test 4 bad wire
    How can I bypass everything in order to test to make sure the coil is getting juicem? Thanks for any/all help.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 1, 2010, 06:41 AM

    What make , model, and year of vehicle? Is coil and distributor 1 unit?
    4 bad wires need to be replaced, not tested.
    If you like your car and it has been a while, Change Plugs, cap, rotor, wires and filters, it can only help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ignition Module test [ 2 Answers ]

Hi guys Furnace : whisperheat with ignition box close and open The furnace carries ignition model and spark sensor pilot. On G/V you can see mp mp/mv mv which are all connected to the igniton module and grnd connected to the furnace . Now the problem : When you call for heat ,the...

Bad Universal Ignition Module? [ 3 Answers ]

Hello, I had someone look at my handler and they said the circuit board went bad. He rigged one of the wires so that the fan would run and this would let the A/C come on. (I am in Florida) I called a company that worked on my friends unit and he instructed me to buy the WR 50A65-853 Model, but I...

Ceramic tile aroung bathtub/shower [ 4 Answers ]

I am installing travertine tile around a bathtub/shower. I have heard of two different ways to do this and was wondering which one was the best option. 1. Plastic moisture barrier on studs covered by 1/2 inch cement backer board 2. Plastic moisture barrier on studs covered by 1/4 inch...

View more questions Search