Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Evcon Furnace 3 Flashes Combustion Air Switch Failed to Close. How Do I Repair It?
[ 2 Answers ]
Evcon Central Furnace fault light flashes 3 times, combustion air switch failed to close, how do I make repairs?
Coleman evcon furnace
[ 5 Answers ]
My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...
PS failed to close Coleman Evcon Model as36a264t LM
[ 10 Answers ]
Coleman Evcon Model as36a264t LM Hi I have the above model forced natural gas furnace. I started getting the three blinking lights indicating the pressure switch failed to close. I am not sure what to do. I removed the rubber hose and mde sure nothing was stuck in it and blew through it (hose...
Coleman Evcon Furnace
[ 1 Answers ]
We have a Coleman Evcon DLAS075BDD furnace which keeps displaying error codes: 1-Ignition Failure and 4-Limit cycling. We have replaced the circuit board. Inspected the ignitor and the flame sensor and both appear good. Also have taken the exhaust vent/hood off and vaccuumed out any rust to...
Coleman evcon furnace
[ 1 Answers ]
I have a coleman evcon direct vent forced air furnace, the air is blowing cool air, everythinig else is working it's firing ,the fan is working View more questions Search
|