Ask Experts Questions for FREE Help !
Ask
    roguemama's Avatar
    roguemama Posts: 3, Reputation: 1
    New Member
    		  
    #1

    May 23, 2010, 06:22 AM
    Blades stop spinning
    Craftsman II, 12.5hp, 38" deck. New belt, engagement arm functional. Blades spin after engagement, but there's a stop and start theme. Makes an awful racket, too. Engine strong, drive belt seems fine, too. Just can't keep the blades spinning. Any advice?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    May 23, 2010, 06:37 AM

    Woodruff Key or shear pin?
    roguemama's Avatar
    roguemama Posts: 3, Reputation: 1
    New Member
    		  
    #3

    May 23, 2010, 07:28 AM

    I have no idea! I just drive it, I don't fix it.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    May 23, 2010, 08:15 AM

    We thought you wanted ideas on how to fix the issue. If you just drive and don't fix then call Sears or take it to a shop nearby. Do not continue to engage the blades. http://www.searshomeservices.com/law...20090527x00058
    roguemama's Avatar
    roguemama Posts: 3, Reputation: 1
    New Member
    		  
    #5

    May 23, 2010, 10:19 AM

    I do want to fix it. I'm a beginner.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #6

    May 23, 2010, 11:05 AM

    OK lets start with who installed the belt, you? Did you follow the belt diagram on the Sears deck? sears tractor belt diagram - Google Search
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Garbage disposal won't stop spinning [ 3 Answers ]

I accidentally dropped a screw in our garbage disposal and it made a terrible noise. I decided to unplug the unit so that I could fish the screw out. Well, I got the screw out just fine but when I went to plug the unit back in, it won't turn off. I have tried playing with the switch to see if it...

GE Washer stop spinning [ 1 Answers ]

Hello All: My washer was spinning, then suddendly stopped. - I pulled out all clothes, then start a new cycle. Wafer was filled up OK. But never spinned. - I turned to "final spin" to see if it spins, but no spin at all. I can only hear the sound of water draining out. I open the lid up. The...

Tub Spout Won't Stop Spinning [ 1 Answers ]

I recently replaced my tub spout but I can't get it to sit flush with the wall. When I try to tighten the spout onto the plastic nipple, the plastic nipple just spins on the copper pipe. The plastic nipple is screwed onto a brass fitting that was already attached to the copper pipe. How do I...

Hampton Bay Fan - will not stop spinning [ 1 Answers ]

Our Hampton Bay fan will not stop spinning. I can turn on the light with the remote, but I can't stop the fan. The remote has an option to control the speed of the fan, but changing the speed on the remote only changes the direction the fan spins at full speed. The dip switches appear to be...

GE washer won't stop spinning [ 1 Answers ]

So, I had started my washing machine when I realized someone else in the house had used up all the laundry detergent... :cool: So I turned it to off. When I got the detergent, I tried to turn it on, and it went to spin. I turned the knob around a few times, trying to start it each time in...

View more questions Search