Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a VFD input 230V 28.5A... out put 230V 10A 3phase, what breaker & wire gauge?
[ 4 Answers ]
I inherited a 1972 Unisaw 3hp 3Phase motor. I have a 30 amp breaker going to my detached garage with a sub panel of 4 15amp breakers. The VFD to run the saw has an input of 230V single phase 28.5amps (I am not sure if this is the correct amount of amps, seems kind of high) and an output of 230V...
15amp circuit 12 or 14 gauge wire? For elliptical
[ 2 Answers ]
I just purchased a elliptical machine and they recommend for it to be on a 15-amp grounded outlet with only the elliptical plugged into the circuit. I am installing a dedicated 15-amp circuit and my question is this, should I run a 12 gauge or 14 gauge wire?
12 gauge wire to a 15 amp breaker
[ 6 Answers ]
I am selling my home and the inspector noted three 15 amp breakers with 12 ga wire. He flagged it as something to be checked by an electrician. Is this an unsafe situation? The buyer is concerned. How much of a concern should this be? If it is not unsafe, what is the explanation for why is...
How to wire an 15amp dedicated outlet from breaker panel to kitchen
[ 1 Answers ]
I need to put a 15 amp outlet that has its own breaker in my kitchen above the cabinets or in cab over oven. This is for a microwave oven. Thanks in advance for any help!
What is the cable/wire gauge (product name) for installing 200 Amp Service Entrance
[ 1 Answers ]
I am installing a new service entrance to upgrade my home electrical service to 200 amps. 1 Please tell me what gage wire is required from the meter to the weather-head? The service panel with main breaker is inside the laundry room 25 feet from the outdoor meter loop. I will run the... View more questions Search
|