Ask Experts Questions for FREE Help !
Ask
    Dhodell669's Avatar
    Dhodell669 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 11, 2010, 10:54 AM
    How to remove front brake rotor 2007 camry
    How do I remove the front brake rotor on a 2007 camry?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    May 11, 2010, 11:04 AM

    1. Loosen lug nuts, raise vehicle, and support securely on jack stands placed under the rocker panels. Remove front wheel.

    2. Remove brake hose mounting bolts.

    3. Remove caliper, hanging it off to one side with wire or bungee cord. Remove brake pads, caliper bracket mounting bolts, and bracket.

    4. Remove 6 mm brake disc retaining screws (2). This may require using a hand impact set (Craftsman 47634), using a #3 Phillips head tip.

    5. Screw two 8 x 1.25 mm bolts into the disc to push it away from the hub, turning each bolt two turns at a time to prevent cocking the disc excessively.

    6. Remove brake disc rotor from knuckle. Clean rust from surface that mounts against the hub, since this can affect lateral runout (LRO).
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tools needed to replace brake pads 2007 camry se [ 8 Answers ]

Are there any special tool required to replace rear brake pads and or rotors on a 2007 Toyota Camry SE 6cyl. Didn't know if I needed anything special to colapse the pistons to replace the pads. Thanks, Craig

Changed 2000 camry brake light switch, but still will not shift and no brake lights [ 1 Answers ]

My sons 2000 Camry stopped shifting, no brake lights and no cruise control. I changed out the brake light switch, but it still does not work? Any ideas, please. Thanks

Frt brake rotor stuck - removal? [ 5 Answers ]

Hello, When the front brake rotors on my 2001 Accord were stuck and had to be forcibly removed, I found that the bolt which clamps the brake line to the strut fit the rotor hole exactly, and within 2 minutes had the rotors off. Does anyone know if this same design exists in any other model...

Brake rotor removal 82 datsun 4WD [ 1 Answers ]

Hi- we have an 82 datsun p/u 4WD that needs resurfacing of front brake rotor. Have removed caliper but can't get "plate" off that allows removal of rotor- is there a trick, or hidden bolt? Hope someone has some solution. Thanks, Lynne

Brake rotor [ 1 Answers ]

How do I remove the brake rotor on a 1992 honda accord

View more questions Search