How do I remove the front brake rotor on a 2007 camry?

1. Loosen lug nuts, raise vehicle, and support securely on jack stands placed under the rocker panels. Remove front wheel.

2. Remove brake hose mounting bolts.

3. Remove caliper, hanging it off to one side with wire or bungee cord. Remove brake pads, caliper bracket mounting bolts, and bracket.

4. Remove 6 mm brake disc retaining screws (2). This may require using a hand impact set (Craftsman 47634), using a #3 Phillips head tip.

5. Screw two 8 x 1.25 mm bolts into the disc to push it away from the hub, turning each bolt two turns at a time to prevent cocking the disc excessively.

6. Remove brake disc rotor from knuckle. Clean rust from surface that mounts against the hub, since this can affect lateral runout (LRO).