90 civic 1.5 belt replacement Left or right handthread on crankshaft bolt

tosh42 Posts: 1, Reputation: 1

New Member

May 10, 2010, 02:32 PM

90 civic 1.5 belt replacement Left or right handthread on crankshaft bolt

1990 civic 1.5 crankshaft bolt Is it a left or right hand thead

TxGreaseMonkey Posts: 16,761, Reputation: 5597

Uber Member

May 10, 2010, 05:01 PM

Right-handed.

Add your answer here.

Check out some similar questions!

Nissan Frontier crankshaft position sensor replacement? [ 8 Answers ]

Hello All, First time here, hope someone can help me, and I look forward to assisting others in the future. I have a 2000 Nissan Frontier with a 3.3L V-6, automatic transmission. Recently, it has a problem. The truck starts fine, idles and runs OK for the first 10 minutes, but after that it...

Timing Belt replacement 1998 Honda Civic [ 6 Answers ]

I have a 1998 Honda Civic in which the mechanic says that the timing belt needs to be replaced. I have 60K on the car however the owner's manual is giving me conflicting advice. It states that in normal conditions you should change the belt at 105,000 miles. In severe conditions you should change...

Horseshoe washer, where can I get a replacement, together with a 7mm bolt to fit the [ 1 Answers ]

Hi Ive a tap/faucet to fit, but but no 'fittings'! Does anyone know where I may be able to get some (horseshoe washer, 7mm bolt etc), as I've tried our local diy stores & plumbers merchants, with no luck?

92 Voyager 3.0, crankshaft damper bolt removal [ 7 Answers ]

I am changing the timing belt on a 92 Plymouth Voyager, 3.0 liter Mitsubishi engine. I have been unable to break loose the 22mm bolt attaching the damper to the crankshaft. Have tried breaker bar and 4 lb. hammer, breaker bar and 2 ton hydraulic jack, air impact wrench (230 ft. lbs. torque only),...

Crankshaft Pully Bolt [ 5 Answers ]

Trying to loosen the crankshaft pulley bolt on a 87 Honda accord. Can't find away to hold the pulley and turn the bolt. Any help would be appreciated.