Ask Experts Questions for FREE Help !
Ask
    blues519's Avatar
    blues519 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    May 8, 2010, 04:53 AM
    Print out on how to install rear wheel bearings/
    Diagram
    blues519's Avatar
    blues519 Posts: 4, Reputation: 1
    New Member
    		  
    #2

    May 8, 2010, 04:55 AM
    Print out page 2005 chevy equinox?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    May 8, 2010, 05:57 AM

    Replacing rear wheel bearings on all FWD cars is, basically, the same. These links should help:

    https://www.askmehelpdesk.com/cars-t...ml#post1653648

    https://www.askmehelpdesk.com/cars-t...ml#post2318215

    Be sure to use a new spindle nut and torque it to the specified number of lb.-ft. Your local auto parts store or Chevy dealer should be able to provide that information to you. AutoZone will lend you a spindle nut socket for free. You will also need a 1/2-inch drive breaker bar (25"), or air impact wrench, and a 25 to 250 lb.-ft. torque wrench. It's a simple, straight-forward procedure.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Grinding noise in rear end after getting new shafts, bearings, and seals? [ 1 Answers ]

I have a rear end vibration/shimmy in my 2000, Nissan, Frontier, 4cyl, 2wd, pickup that I have been battling for years to get rid of and it is driving me nuts!. I have replaced the 3rd member (needed to be replaced due spider gears), transmission (needed to be replaced due to wrong lubricant),...

Wheel Bearings [ 3 Answers ]

How do I go about repacking wheel bearings on a 2003 Mercury Grand Marquis?

How to Remove Rear Wheel [ 1 Answers ]

How to remove rear wheel from Murray riding mower that has a square key in the key slot.

View more questions Search