Diagram

Print out page 2005 chevy equinox?

Replacing rear wheel bearings on all FWD cars is, basically, the same. These links should help:

https://www.askmehelpdesk.com/cars-t...ml#post1653648

https://www.askmehelpdesk.com/cars-t...ml#post2318215

Be sure to use a new spindle nut and torque it to the specified number of lb.-ft. Your local auto parts store or Chevy dealer should be able to provide that information to you. AutoZone will lend you a spindle nut socket for free. You will also need a 1/2-inch drive breaker bar (25"), or air impact wrench, and a 25 to 250 lb.-ft. torque wrench. It's a simple, straight-forward procedure.