Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Washer Stand Pipe Overflow?
[ 2 Answers ]
:(My Kenmore extra large washer started over flowing them 2-inch standpipe recently. I have read the answers posted here and snaked most of the plumbing. I can't get a drain auger through the J-trap attached to the standpipe; however I ran the power auger through the down stream kitchen sink...
The drain pipe for the washing machine with our old washer would overflow on the spin
[ 3 Answers ]
The drain pipe for the washing machine with our old washer would overflow on the spin cycles... we bought a new washer and it still overflows.. now we are using Stormbag - Sandbag flood to that overflow. The pipe is only 1-1/8" we have snaked the pipe, used chemicals, even used the bladder (which...
How to change a welded copper overflow pipe to washer drain pan?
[ 1 Answers ]
Has anyone found a way to change the 3/4 copper overflow drain pipe that goes into the galvanized pan (under a washer) to plastic flange assembly with rubber washers? The system that the builder used was to run a copper pipe up into the pan and then soldered it to the pan - but the pipe sits up...
Convert washer overflow pipe to floor drain?
[ 2 Answers ]
As part of new construction, my laundry room came with a small drain pipe installed in a floor tile and inserted through a washer pan. The location wasn't ideal for easy access to the washer/dryer, so my washer/dryer are now in a different location in the same room. What to do with the pipe? I... View more questions Search
|