 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Install repair vinyl fencing
I have a 6' high vinyl fence, 5' solid with a 1' lattice at top. It is not held together by brackets but by a tab into the post configuration. I'm trying to figure out how to remove a panel without cutting the tabs with a sawzall. I've heard they may snap into place and can be pushed out from inside the post for removal. I am going to look down the post tonight but was wondering if anyone is familiar with this type of fencing?
|
||||
Check out some similar questions!
Hi, I am going to lay new "no-glue" vinyl flooring in the kitchen. I've repaired the existing floor, but have some patches that are uneven. I want to "smooth out" the existing floor so the new floor doesn't show the irregularities underneath it. What kind of compound or stuff can trowel...
Howdy I'billydown and I'm new, I have several holes in my vinyl siding. I have no extra siding to replace it and the color has been discontinued. How can I repair those holes myself?
How much does it cost to install vinyl siding per square 10ftx10ft in New York state
How do I install a new (free) horizontal sliding glass window into my old construction shed. It has no nailing flanges, it is 35-1/2 in. X 41-1/2 in.
I have two small(less than 1.5 inch) tears in my kitchen vinyl. They are pretty superficial, but also very noticeable to me. They are also on opposite sides of the kitchen. Is there a way to repair these tears other than replacing a section of the vinyl?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
