Ask Experts Questions for FREE Help !
Ask
    Michael61's Avatar
    Michael61 Posts: 2, Reputation: 1
    New Member
     
    #1

    May 1, 2010, 01:01 PM
    My craftmen mower won'start
    I bought a craftmen lawn tractor K1000.It sat for two years.The engine turns over but won't try to start.I use etther ,it runs for a second.There is a wire connection at the bottom of the float bowel'Is this a valve?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    May 1, 2010, 05:07 PM

    Hi,
    That is the anti-backfire solenoid on the bottom of the carb. It could be gummedup after sitting/ Likely the whole carb is.
    The solenoid can be removed and cleaned with carb cleaner and manually operating the plunger.
    Peace,
    Clarke
    Michael61's Avatar
    Michael61 Posts: 2, Reputation: 1
    New Member
     
    #3

    May 1, 2010, 08:31 PM
    Quote Originally Posted by crigby View Post
    Hi,
    That is the anti-backfire solenoid on the bottom of the carb. It could be gummedup after sitting/ Likely the whole carb is.
    The solenoid can be removed and cleaned with carb cleaner and manually operating the plunger.
    Peace,
    Clarke
    Thanks for aswering my question.I did get it started since I ask the question.It ran pretty rough for a while.I left it warm up and then I changed the oil and added some STP gas additive.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need a mower deck belt for a Craftsman xls 1000 riding lawn mower. [ 2 Answers ]

I can't find a belt for my Craftsman xls 1000 riding lawnmower deck.

Craftsman mower stopped moving but blade engagement still works and mower starts [ 7 Answers ]

Can someone help me determine why my craftsman kohler engine 16hp manuel transmission riding lawnmower stopped being able to move but still is able to turn on/off and engage the mower blade? I have checked the clutch but it appears to work since the mower is able to be turned on/off. All of the...

Briggs and Stratton Craftmen ELS wire colors [ 1 Answers ]

I am rebuilding a standing mower. I purchased a used 26 HP Briggs and Stratton engine. There are several wires that I need to connect. Does anyone know what the wires from the engine correspond to. How can I find out? Thanks

Diagram for replacing lawn mower belt on Toro 1744HXL riding mower [ 1 Answers ]

I need a diagram for replacing the belt in the mowing deck of a Toro 17-44HLX riding mower


View more questions Search