Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can't find bleeder valves to bleed hot water heat pipes
[ 2 Answers ]
We've just bought a 50-year old home with baseboard hot water heating. I know how to bleed pipes and radiators to release air blocks, but I can't find any bleeder valves in the "usual" places at either end of the copper pipes. :rolleyes: Sounds silly, I know... Would they be located...
Water won't shut off in bathtub
[ 6 Answers ]
Water won't shut off in tub... continues to have a slow flow
Shut valves do not turn water back on
[ 8 Answers ]
Hi I have been doing some simple faucet repair in the last week. But after I turned off the water to the bathtub using older style shut off valves under the tub, I could not turn them back on. (No water to the tub.) One shutoff valve handle turns without ever stopping, while the other turns only ...
Are all shut off water valves the same?
[ 1 Answers ]
Are all shut off water valves the same? I want to change two shut off valves and the house was built on the seventies and that is the reason of my question? I will be looking forward to hearing from you soon.
Corrosion? Of Plastic Stems of Water Shut-off Valves
[ 4 Answers ]
In a condominium constructed about 12-15 years ago in Henderson, NV, I discovered 6 out of 8 under-sink water shut-off valves to have badly corroded valve stems, if that term can be legitimately applied to plastic. The "corrosion" was so bad that one valve had failed causing a flood. Since 75% of... View more questions Search
|