Ask Experts Questions for FREE Help !
Ask
    javi6975's Avatar
    javi6975 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2010, 11:22 AM
    How do u set the timeing on a lawmorwer
    I took apart my lawnmower to put a gasket on it and when I took it apart the gears inside fell apart. I put them back in but I'm not sure if the timeing on them is corect. Now the lawnmower won't start and it did before I took it apart.
    javi6975's Avatar
    javi6975 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Apr 26, 2010, 11:24 AM

    I took apart my lawnmower to put a gasket on it and the gears inside fell apart. I put them back in and now it won't start. I think the timeing is off. How do you set it so I will start?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Apr 27, 2010, 09:52 AM

    Hi,
    Would be a likely circumstance. The crank gear will have marked tooth that fits in a marked gap between teeth on the cam.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

When set up ask press enter to set up windows then no reaction on the keyboard [ 1 Answers ]

Place a windows cd in PC. When boot it ask "press any key to boot from cd. When I press any key windows set up starts. Now here is the problem when it get to the next screen if yuor'e num lock are on the light goes dead and when it ask you to press enter to set up windows the are reaction on the...

Motion to set aside default, motion to set aside final judgment and motion to set ano [ 3 Answers ]

Hello, I'M in Florida Jacksonville, I have a small problem, I read the time wrong to appear for my small claims court trial and arrived at 11:15am but is was scheduled at 11am 9/3/09. I tried to explain but did not get anywhere, so I went downstairs to the courthouse and filed a motion to set...

How to Set Set Up a Business When Marrying Someone From Another Country. [ 3 Answers ]

Hello I am new to the forum! I would like to ask, since I am marrying someone from another country, how to apply for social security card/tax id and how long it would take to receive a number? And after doing so, how would this new credit appear to creditors/ the bank, as we will be setting up...

12.5 Briggs timeing [ 1 Answers ]

I put the motor back tougher I was surprised when I placed the head and the spark plug hole was over the valves . I set the dots together for the timing . I tried to start it fired a little . But it seems to be blowing back through carb can you help me?

Shoot-set and Quick-set Combo [ 2 Answers ]

I have not seen this yet, but I haven't seen everything... lol I was thinking that these two misdirection sets could be used in a single play because the quick-set causes the opponent to position, dig-in, and focus on the quick-set hitter, but the ball could be shoot-set along the net for anyone...

View more questions Search