Ask Experts Questions for FREE Help !
Ask
    ccwatkins's Avatar
    ccwatkins Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 19, 2010, 02:26 PM
    14.5 hp B&S mower engine doesn't start
    First use of season, 145 hp B&S engine doesn't start. Got sparks, gas isn't getting to plug. I have gas flow beyond the fuel filter, however.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Apr 19, 2010, 06:18 PM

    Hi,
    Gummed up carb, I dare say. Needs cleaning, especially the main jet since that is what would prevent from getting to the plug even if it was not in the correct quantity.
    Peace,
    Clarke
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #3

    Apr 19, 2010, 06:22 PM

    Agreed, drop the bowl and clean it out. Also remove, clean and reinstall the needle valve. Was there junk in the bowl?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #4

    Apr 23, 2010, 11:20 AM

    You might try some sea foam.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #5

    Apr 25, 2010, 05:08 PM

    I would agree that some good carb cleaner be used. It's a bit odd that DG gave me a reddie when I said the same thing a few months back, wonder what's changed? https://www.askmehelpdesk.com/tools-...ml#post2249264
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #6

    Apr 25, 2010, 07:31 PM
    Just trying to keep the peace.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #7

    Apr 25, 2010, 07:32 PM

    Done

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

20 hp Briggs and Stratton engine won't start -TroyBilt mower [ 4 Answers ]

I have a Troy Bilt riding mower and it won't start. The battery has been checked. I think it's the starter. Anyone know how to change the starter?

Murray riding mower Engine won't start [ 1 Answers ]

Murray 14hp, 42" cut md# 42813x92A My murray was starting and running fine one day, and the next the engine would'nt turn over. I charged the battery, nothing. I replaced the solenoid, checked all my wiring connections, cleaned the contacts, checked the fuse, cleaned the ignition contacts, and...

Briggs engine on MTD riding mower won't start [ 1 Answers ]

Hi. I have a problem with a Model 600 series MTD Lawn tractor. I can get it to turn, and it will run a bit with ether sprayed in the carburetor neck. I know this points to a fuel issue, but want to troubleshoot the kill switches. I believe there are three in this model, One on the seat, one on...

B&S 15 HP mower engine [ 5 Answers ]

Hi all, I was given a Bolens riding mower with a 15 HP Briggs engine on it, the mower had been sitting a while outdoors so I changed the oil, the fuel filter, and cleaned the carb and replaced the battery, when I started it up it would run and then stop and run and then stop. Then it ran for 10...

Murray 12.5 Commercial Mower - Briggs Engine - Won't Start/Turn [ 3 Answers ]

So I'm mowing my back yard with my Murray lawn tractor. I brought it back to the garage and parked it, went inside to cool off, and when I went back out to put it back into the garage, it wouldn't start. I turned the key, and got nothing. The lights work, the battery is charged to 100%,...


View more questions Search