Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring hunter fan and light /light to 3 way and fan to on off wall switch
[ 4 Answers ]
I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...
Hunter Ceiling Fan - Light Works, Fan Does Not
[ 1 Answers ]
I installed the ceiling fan about 4 years ago. We use a remote to control it. Recently, the fan is no longer turning on with the remote, but the light works with the same remote. As the fan is on a high ceiling, I need a tall ladder to get to it - so, I'm trying to find the answer or possible...
Hunter ceiling fan, nothing works
[ 1 Answers ]
We have a hunter ceiling fan in our home (that was put in by the previous owners), the only way to operate it is with the Huge universal remote that it came with, however recently it has been acting up, at first the high setting for the fan would not work, now nothing works, the light will not even...
Remote works, light works, fan humms does not turn
[ 2 Answers ]
Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...
Hunter fan. Light works, fan does NOT
[ 8 Answers ]
I have a Hunter fan that has worked fine for 3 years. Now when I try to turn it on it won't spin. I hear the switch trying to turn the fan on through all speed settings. (low, med, and hi) but it won't turn on. The light turns on using the remote and I did change the battery in the remote. ... View more questions Search
|