Furnice burner won't stay on

waltergardner Posts: 1, Reputation: 1

New Member

Apr 18, 2010, 11:24 AM

Furnice burner won't stay on

Luxaire G9T06010UPB13A Burner runs abount 10 seconds shuts off repeats this process 2x then shuts down

Joshdta Posts: 2,549, Reputation: 45

Ultra Member

Apr 18, 2010, 11:39 AM

Sand the flame sencer

Add your answer here.

Check out some similar questions!

Furnace burner does not stay long and goes out [ 3 Answers ]

My furnace burner does not stay long. I had my pilot light goes out. I lit the pilot light and it works. And as soon as I put the wall thermostat on ON position for heat, I can see the burner starts with the normal flame. But after 30 seconds burner flame goes off as well the pilot light goes out...

Burner does not stay on for a Lennox furnace [ 3 Answers ]

I have a lennox 1994, 80% ignition, furnace. I am having a problem getting the burner to stay on until the house reaches the specified temperature. When the burner shuts down, the blower keeps running. In order to get the burner to kick on again, I have to fool with the thermostat such as turning...

Burner motor won't stay on [ 1 Answers ]

Have a gas forced air furnace. Not sure of the name brand. When it calls for heat, the burner kick on, but won't stay on. They will burn for a short period, then they will turn off. The fan motor stays running, but I had to turn the start temp for the fan way down so it would blow what warm air...

Burner won't stay lite [ 1 Answers ]

I have a Maytag Neptune MDG3000AWW gas dryer that will lite in all three modes (intellidry , time dry/air fluff, and intellidry ) but will only stay lite of 8 to 10 seconds. After ltwo or three minutes it lites again for another 8 to 10 seconds. Takes all day to dry a load.

Furnice pilot will not stay lit [ 1 Answers ]

I need help figuring out what to do with my furnace. It is a Lennox gas fired fuirnace model G1203-110-3 and is over 20 yrs old, not one of the new energy efficient furnaces, and the pilot keeps going out at night resulting in some cold evenings. If it is the Thermo Couple, can it be replace...