Ask Experts Questions for FREE Help !
Ask
    rkwrkw's Avatar
    rkwrkw Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 15, 2010, 03:17 PM
    How do I change the washer on a diverter for a shower
    I have a shower which has water coming out of the tub spout as well as the shower spout. I have a third valve with a knob that turns to left to turn the shower on. I have a plumber telling me that water is always going to come out of the tub spout when shower is on. I disagree. How can I fix this problem on my own...
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #2

    Apr 15, 2010, 07:53 PM

    Water should not come out of the spout while shower head is in use. If it does than you need to replace washer inside the diverter. It is same procedure as when you replacing washer at hot/cold water stem. Diverter has one extra plastic washer (white in color). This washer may be split. If so, replace it.

    When you are finished with your shower and close water - yes, water will slowly drip out (pour out) from the shower stand pipe and through the spout. This is how faucets are designed...
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #3

    Apr 15, 2010, 08:13 PM

    The diverter stem can be remove and rebuilt or replaced just like the hot or cold water valve stem.





    What I think Milo means about when you finish your shower is that if you had a diverter valve on the tub spout, when the water is turned off, the diverter (on the tub spout) will automatically open and switch back to tub filling.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to change a shower faucet washer [ 13 Answers ]

I'm hoping that someone can explain how to remove the sleeves from a shower faucet, to enable me to remove the valve stem. The shower was installed about 1970, and I don't know what make it is. I've removed the valve knobs, and the stem protrudes from a sleeve about 3 inches long. Looking inside...

Shower diverter leaks into tub when turned to shower [ 2 Answers ]

I'm trying to replace my shower diverter valve since it leaks into the tub significantly when turned to the shower. It's a 3-knob system (hot, diverter, cold) and I don't know the brand. I've gotten the knob off, the surrounding piece off, and one nut off, but I'm not sure what to take off next...

How do I change the washer in a moen single shower handle [ 4 Answers ]

How do I change the washer in a moen single shower handle

Change Shower Diverter [ 2 Answers ]

Hello, I have a shower diverter that is very hard to turn. There are 3 knobs one hot, one cold, and one shower diverter. I am not sure what brand. I do not know how to replace it and I am not able to get to the back as it entirely sealed in. I unscrewed a "nut" thinking it would come up but...


View more questions Search