 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
No Start - No Run, 1986 Chevy 4X4 p/u
[ 2 Answers ]
Engine turns - no start - no spark - ran line from battery to Distributer - starts and runs great. Checked voltage at distributer - showed 11.5 volts - when line was ran direct from battery - was 12 volts. Engine is 3.0 V-8. New plugs, New spark plug wires, new distributer, new coil, and new...
How to replace an ignition switch on a 1992 chevy pickup truck
[ 1 Answers ]
How to remove an ignition switch on a 1992 chevy pickup
79 chevy 4x4
[ 1 Answers ]
I have a 1979 chevy 4x4 the is a 4 speed manual tranny... how do I get the clutch to disengage or do I have to put a new one in it
73 Dodge 3/4ton 4X4 Truck
[ 2 Answers ]
Starter solenoid keeps going out-overheats and quits working. Know this means too much voltage to the solenoid, what needs adjusted/replaced now? Have replaced voltage regulator, plug wires, battery, rotor & points. Help
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
