Ask Experts Questions for FREE Help !
Ask
    kingji's Avatar
    kingji Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 18, 2006, 04:38 AM
    Oil leak
    My Honda accord ex 91model, refused to start one morning, and I brought in a mec to solve the problem but he went and removed the valves meanwhile the problem was the fuel relay. Now my problem is that the oil level keeps going down and there is no oil drops on the floor. Somebody thinks that I may have a leaking valve. The rings are o.k. I have 143,000km on the car.

    Secondly, my check engine light was on and I tried reading the stored codes in my ECU but after following the recommended procedures, I was unable to decipher the codes it was throwing up. The light on the dash kept flashing non stop. I counted up to 15 times stopped and tried again yet the same result.

    Does anybody have any suggestions please?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Dec 18, 2006, 09:27 AM
    Read the sections on ignition troubleshooting:

    https://www.askmehelpdesk.com/cars-t...ons-46563.html

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2001 dodge ram 1500 oil leak [ 1 Answers ]

My dodge ram v6 is leaking oil from the shaft tha comes out of the water pump. There is no oil in the water. Is there a seal that can be raplaced by removing only the fan or is this going to be a total nightmare??

Oil leak [ 2 Answers ]

I have an oil leak somewhere in my 93 civic ex and I was wondering what I could do about it. A mechanic friend said it looks like its coming from the "oil sending unit"? I think. And that some kind of gasket or seal in that needs to be replaced. Please help.

Commercial oil-based v.s artist's oil paint [ 1 Answers ]

I am painting on interior brick, already painted with oil-base commercial and wish to use commercial oil-base paint because I think it is more durable than artist's paints, i.e. dusted, perhaps even washed. Is there something I can use to thicken it, thus allowing it to work more like artist's...


View more questions Search